Volkswagen Touareg Forum banner
121 - 140 of 233 Posts
Found a way to enable Aux.Heater in RCD-550.

0. Check if you have Eberspacher label between from and back door (what is the name for this place? central stand?). It's usually installed on TDI 240, 245hp, but not 204. The other way is to see if you have module 18 in VCDS

1. Get a fresh VCDS (10.6 and newer). Goto module 56-Radio, 07- Coding, Long Coding Helper and select byte 8 bit 6, then apply new coding. A new button in Climate menu would appear, but it still can't be pressed.

2. Goto module 08-AutoHVAC, Long Coding, select byte 1 bit 4. Restart the engine, now everything works.
 
Got the BT working today (thanks Gerry, I know that you're lurking on the forum!
Image
)

The ringtone is the car is different from my phone and I looked everywhere on the phone and unit to see how to change it. Am I missing something?
 
Yet another happy 'Bluetooth enabled customer' - if any further confirmation is needed...it is possible to enable Bluetooth/Phone on the new Touareg with nothing more than a cable.

I didn't have to remove a fuse or leave the car overnight - simply performed the hard reset by pressing the buttons simultaneously, as detailed.

Thanks to all on this forum for the information provided! Excellent.
 
I've fguered out the following:

It's possible to enable the "Hybrid"-Screen in the RNS 850: Go to the Green Menu --> car/cardevicelist - selecting "Hybrid" and under car/carmenuoperation set the hybrid value to "5". After restarting the RNS 850 there will be an new entry under "Car" like this:

Image


The battery charge won't work, but you can read the values from the boardcomputer like averagew consump, average speed and so on.

I also noticed, that the RNS will start every time with the hybrid screen and it seems the average values "from start" "from last tankstopp" are resetet by activating this screen.

CU
Zed
 
Hi,
I have a Touareg with a premium GSM package and I saw it is possible to activate Wifi/hospot access via that.
Is it possible ? Or do I need some other HW.

I am still about to buy VCDS so I am looking for some nice features to activate.

Thank you,

Martin
 
hi,

it's not possible to use the wlan-function in a usefull way. No way to connect your smartphone or pc in a permanent way. its only possible when the green menue is activated. If you restart the rns; the connection is lost. I think it will be for further generations. Actually the rns is the mmi3g system of Audi. there are many undescribed functions.

CU
Zed
 
Hi all, I just got my VCDS cable and have enabled bluetooth on my 11 plate T3, I just wanted to check 1 thing, the instructions said to go from 'AUX/no AMI BT/AMI' to 'AUX/AMI BT/AMI', but my car was defaulted to 'no AUX/no AMI BT/AMI', I have set to 'AUX/AMI BT/AMI' and then rest of the procedure worked as described and BT is working
Image


I was just wondering what the no AUX/AUX part actually refers to, does anyone know?

edit: ok, I think I figured it out, I guess some cars are equipped with a separate AUX, as opposed to the AMI to line in cable.

ps. BT phone is working fine, although my phone button on the steering wheel doesn't actually appear to do anything
 
This is the button I mean, all other options by MFD are working from the right hand side of the steering wheel, but this one button does nothing, anyone else who has enabled bluetooth via vag-com have same problem, or anyone know how to make button function identical to factory installed bluetooth?
 

Attachments

Before I start a new thread - is there a Vagcom tweaks thread for the T2?

I have used search function, but cannot find anything that correlates to this thread for the T2. Anyone know if one exists?
 
This is the button I mean, all other options by MFD are working from the right hand side of the steering wheel, but this one button does nothing, anyone else who has enabled bluetooth via vag-com have same problem, or anyone know how to make button function identical to factory installed bluetooth?
Have you tried pressing this when in a hands free call as pressing this on mine ends the call?
But I have to use the voice command below to start the hands free call.
 
Before I start a new thread - is there a Vagcom tweaks thread for the T2?

I have used search function, but cannot find anything that correlates to this thread for the T2. Anyone know if one exists?
Just a single VCDS section is needed as long as, like you, we can see what vehicle you have in your signature. Some commands and procedures are the same so we could have duplication.
 
Just a single VCDS section is needed as long as, like you, we can see what vehicle you have in your signature. Some commands and procedures are the same so we could have duplication.
I don't understand the response!

Does a specific thread exist? Or are you suggesting I post in here for the T2 questions I have?
 
Normally you would start a new topic in the electronics section. But I was suggesting it might be prudent to start a new general topic or section. The T3 section is a bit of an oddity as it was originally a discussion about the new model but has become a general posting area for T3 stuff so we have ended up with a hybrid of forums some model specific and some general..
 
Have you tried pressing this when in a hands free call as pressing this on mine ends the call?
But I have to use the voice command below to start the hands free call.
Hmmm, no I haven't tried using it to end a call, I did try using it to answer a call, but it did nothing, I had to use the OK button on the other side of the steering wheel to accept the call.

Next time I take a call in the car, I'll try ending it with the phone button and let you know.
 
I'm interested in ProActive Occupant Protection System - anybody has this feature in CAR - Assistents menu? All Russia Tregs has this feature disabled, and I need some VCDS scans to find which bit it depends
reckless, do you still need this information as I have just taken delivery of a vehicle with this system? Let me know and I can send you scans.
 
reckless, do you still need this information as I have just taken delivery of a vehicle with this system? Let me know and I can send you scans.
Hi evaddirb, and welcome to myTreg.com

Please remember to provide some details about your vehicle (year and model are a good start) in your signature as it helps the members answer your questions. Your location(in your profile) is useful too - who knows? Help may be just round the corner...

Some tips to make your visit here more enjoyable:

If you haven't, please use the 'search' feature at the top right of the page or use google with; [site:www.mytreg.com <search words>] for your questions as they may have been asked before, please beware that the site search need 4 or more letter words, (no limit with the Google search).

Please post your question once in the appropriate discussion forum appropriate to your model and use the topic title & description to briefly summarise the problem. This will assist others and provide for a quicker response. Be patient and a knowledgeable member or guest will address your question.

New members and guests can use the 'View New Content' link next to the 'Search' link top right of the info bar, as a great way to see all of the posts you have missed since you were last on the forum.

If you are thinking of purchasing a Touareg for the first time; please read this excellent buyers guide.

Please feel free to post an introduction in the Introductions Forum and tell us about yourself.

Every member has a gallery area in their profile and we love to see photos of your Touareg in action.

Kind Regards
The Admin Team..
 
SWITCH OFF LED DRL when indicator within the same headlamp is ON.

Address 09-Cent.
Using the Long Coding Helper tick the box in Byte 3
"Daytime Running Lights inactive with Turn Signal ("Winking") active",
Exit the coding helper and click Do It.
 
121 - 140 of 233 Posts